Hardware / Climate node
CLMBeta
Climate node
Air temperature, humidity and CO₂ where your crop is.
Place one or more climate nodes around the room to see the real conditions at crop level.
Commercial (Hub)
Measures
What it reads
Air temperature
°CRelative humidity
%CO₂
ppmwith the SCD41 sensor
Inside
Main parts
- ESP32 WROOM
- SHT40 temperature + humidity sensor
- SCD41 CO₂ sensor (optional)
- RS-485 transceiver
Specs
Details
- Link
- RS-485 Modbus RTU, 115200 8N1, to the Hub
- Power
- 12 V from the bus
Set up
In the app
- Open the Hub in the app
- Tap Add node
- Plug the node into the bus — the Hub finds it
- Name it and pick where it sits
Calibration
Guided in the app
- Temperature / humidity offset
- CO₂ fresh-air calibration
DIY
Build it yourself
Use a standard ESP32 board and install Kinokora firmware from your browser.
Compliance
Certificates
- WPC ETA / BIS
- Will be listed here before sale
Questions
Good to know
How many do I need?
One per room is enough to start. Large rooms benefit from one near the floor and one near the top.
Try the Climate node early
Write to support@kinokora.com with “notify:hardware/climate” in the subject.
Works with